System Subsystem; Default Conditions - Keithley 6430 Instruction Manual

:SYSTem subsystem

The SYSTem subsystem contains miscellaneous commands that are summarized in
Table 17-8.

Default conditions

:PRESet
:SYSTem:PRESet
Description
:POSetup
:SYSTem:POSetup <name>
Parameters
Query
Description
This command returns the instrument to states optimized for front panel
operation. :SYSTem:PRESet defaults are listed in the SCPI tables
(Tables 17-1 through 17-10).
<name> = RST
PRESet
SAV0
SAV1
SAV2
SAV3
SAV4
:POSetup?
This command is used to select the power-on defaults. With RST selected,
the instrument powers up to the *RST default conditions. With PRES
selected, the instrument powers up to the :SYStem:PRESet default condi-
tions. Default conditions are listed in the SCPI tables (Tables 17-1 through
17-10).
With the SAV0-4 parameters specified, the instrument powers-on to the
setup that is saved in the specified location using the *SAV command.
SCPI Command Reference
Return to :SYSTem:PRESet defaults
Program power-on defaults
Power-up to *RST defaults
Power-up to :SYSTem:PRESet defaults
Power-up to setup stored at memory location 0
Power-up to setup stored at memory location 1
Power-up to setup stored at memory location 2
Power-up to setup stored at memory location 3
Power-up to setup stored at memory location 4
Query power-on setup
17-89