Keithley 6430 Instruction Manual page 410

17-100 SCPI Command Reference
:POINts <n>
:TRACe:POINts <n>
Parameters
Query
Description
:ACTual?
:TRACe:POINts:ACTual?
Description
:FEED <name>
:TRACe:FEED <name>
Parameters
Query
Description
<n> = 1 to 2500
MINimum
MAXimum
DEFault
:POINts?
:POINts? MINimum
:POINts? MAXimum
:POINts? DEFault
This command is used to specify the size of the buffer.
This query command is used to determine how many stored readings are in
the buffer. After sending this command and addressing the unit to talk, the
number of readings stored in the buffer will be sent to the computer.
<name> = SENSe[1]
CALCulate[1]
CALCulate2
:FEED?
This command is used to select the source of readings to be placed in the
buffer. With SENSe[1] selected, raw readings are placed in the buffer when
storage is performed.
With CALCulate[1] selected, math expression results (Calc1) are placed in
the buffer. With CALCulate2 selected, Calc2 readings are placed in the
buffer.
TRACe:FEED cannot be changed while buffer storage is active. See
Section 8 for more information.
Specify buffer size
Specify buffer size
1
2500
100
Query buffer size
Query smallest allowable buffer size
Query largest allowable buffer size
Query *RST default buffer size
Query number of stored readings
Specify readings source
Put raw readings in buffer
Put Calc1 readings in buffer
Put Calc2 readings in buffer
Query buffer feed