Read Calc2 - Keithley 6430 Instruction Manual

Sub-femtoamp remote sourcemeter

Hide thumbs Also See for 6430:

Table of Contents

SCPI Command Reference

:CALCulate2:NULL:ACQuire

:CALCulate2:NULL:STATe <b>

Read CALC2

:CALCulate2:DATA?

:CALCulate2:DATA:LATest?

This command automatically acquires the null offset value. The next avail-

able reading will become the offset value.

This command is used to enable or disable null offset. When enabled, the

CALC2 reading will include the null offset value. See :OFFSet. When dis-

abled, CALC2 will not include the null offset.

This command is used to acquire all the readings used for the CALC2 limit

tests. Note that if null offset is enabled, then the CALC2 readings will

include the null offset value. See Null Feed Reading.

At least one of the limit tests have to be enabled to a acquire limit test read-

ings. See Conﬁgure and control limit tests; :STATe.

See Appendix C for a detailed explanation on how data ﬂows through the various

operation blocks of the SourceMeter. It clariﬁes the type of readings that are

acquired by the various commands to read data.

This command works exactly like CALC2:DATA, except it returns only the

latest null offset or limit result.

Automatically acquire REL value

Control null offset

Enable null offset

Disable null offset

Query state of null offset

Read latest CALC2 data

Table of Contents