Remote Operations
•
Differences: Remote vs. Local Operation — Summarizes remote operation enhance-
ments and local-to-remote and remote-to-local transitions.
•
Selecting an Interface — Describes how to select between the GPIB and RS-232
interfaces.
•
GPIB Operation — Covers GPIB bus standards, bus connections, and primary address
selection.
•
General Bus Commands — Describes general bus commands used for fundamental
GPIB control.
•
Front Panel GPIB Operation — Summarizes GPIB error messages, status indicators,
and using the LOCAL key.
•
Programming Syntax — Describes the basic programming syntax for both common
and SCPI commands.
RS-232 Interface Operation — Outlines use of the RS-232 interface to control the
•
SourceMeter via remote.
13