Composite Testing - Keithley 6430 Instruction Manual

Composite testing

PASS:SOURce2 <NRf> | NDN
:CALCulate2:CLIMits:PASS:SOURce2 <NRf> | <NDN>
Parameters
Query
Description
NOTE 16-bit I/O is available with the 2499-DIGIO option. The maximum 16-bit output
value is 65535.
FAIL:SOURce2 <NRf> | <NDN>
:CALCulate2:CLIMits:FAIL:SOURce2 <NRf> | <NDN>
Parameters
Query
Description
<NRf> = 0 to 7 (3-bit)
0 to 15 (4-bit)
<NDN> = 0 to #b111 (3-bit)
0 to #b1111 (4-bit) Binary value
0 to #q7 (3-bit)
0 to #q17 (4-bit)
0 to #h7 (3-bit)
0 to #hF (4-bit)
:SOURce2?
This command is used to define the 3-bit or 4-bit output pattern for the Dig-
ital I/O Port when there are no failures. Note that the output value can be
specified in binary, octal, decimal, or hexadecimal format. Use the table pro-
vided in :SOURce2<NRf> | <NDN>, Description to determine the parame-
ter value for the desired decimal digital output pattern.
The SourceMeter can be configured to place the defined "pass" bit pattern
on the digital output immediately when the "pass" condition occurs, or it
can wait until all testing on a device package is completed (operation leaves
trigger layer). See :BCONtrol for details.
For the sorting mode, this command defines the 3-bit or 4-bit output "pass"
pattern for the Limit 1 test (compliance) when Limits 2, 3, and 5-12 are
disabled.
<NRf> = 0 to 7 (3-bit)
0 to 15 (4-bit)
<NDN> = 0 to #b111 (3-bit)
0 to #b1111 (4-bit) Binary value
0 to #q7 (3-bit)
0 to #q17 (4-bit)
0 to #h7 (3-bit)
0 to #hF (4-bit)
:SOURce2?
For the sorting mode, this command is used to define the 3-bit or 4-bit
output pattern for the Digital I/O Port when there are failures. Note that the
output value can be specified using binary, octal, decimal, or hexadecimal
format. Use the table provided in :SOURce2<NRf> | <NDN>, Description
to determine the decimal parameter value for the desired digital output
pattern.
SCPI Command Reference
Specify composite "pass" pattern
Decimal value
Decimal value
Binary value
Octal value
Octal value
Hexadecimal value
Hexadecimal value
Query programmed source value
Specify "fail" pattern
Decimal value
Decimal value
Binary value
Octal value
Octal value
Hexadecimal value
Hexadecimal value
Query programmed source value
17-37