Figure 10-8 Configure Trigger Menu Tree - Keithley 6430 Instruction Manual

•
Figure 10-8
Configure trigger
menu tree
ARM IN
LINE
IMMEDIATE GPIB
HALT — Use to return the SourceMeter to the idle state. HALT does not turn off the
output. The programmed source level will still be available at the OUTPUT terminals.
The following actions will take the SourceMeter out of idle:
- Turn the output off and then on again.
- Re-select the arm or trigger event.
- Exit from the menu structure, and then re-enter it by pressing CONFIG and then
TRIG.
ARM
LAYER
ARM
COUNT
OUT
EVENTS IMMEDIATE
TIMER MANUAL TLINK
CONFIG
TRIG
TRIG
LAYER
TRIGGER TRIGGER
IN OUT
TRIGGER
LINE
LINK
⇓STEST ⇑STEST
⇑⇓STEST
Triggering
HALT
DELAY COUNT
EVENTS
10-15