Figure - Keithley 6430 Instruction Manual

1-28 Getting Started
Table 1-6
Source and range configuration menus
Configuration menu item
CONFIG SOURCE V
CONFIGURE V SOURCE
PROTECTION
DELAY
AUTO DELAY
DISABLE
ENABLE
GUARD
OHMS
CABLE
TRIG
CONTROL
SCALE FACTOR
CONFIG SOURCE I
CONFIGURE I SOURCE
GUARD
OHMS
CABLE
DELAY
AUTO DELAY
DISABLE
ENABLE
TRIG
CONTROL
SCALE FACTOR
CONFIG ▲ RANGE
CONFIG ▼ RANGE
CONFIG AUTO RANGE
AUTO RANGE TYPE
SINGLE SRC MTR
MULTIPLE
DISABLE
ENABLE
DISABLE
ENABLE
Description
Configure V source.
Select voltage protection.
Program delay between source and measure.
Enable/disable auto delay.
Select ohms or cable guarding.
Control triggered source.
Enable/disable triggered source.
Program scale factor.
Configure I source
Select ohms or cable guarding.
Program delay between source and measure.
Enable/disable auto delay.
Control triggered source.
Enable/disable triggered source.
Program scale factor.
Program upper range limit.
Program lower range limit.
Select auto range type.
Select single SourceMeter operation.
Select multiple SourceMeter, program soak time.