Table of Contents
Advertisement
Ohms Measurements
•
Ohms Configuration Menu — Outlines the ohms configuration menu that allows you
to set up various ohms measurement aspects.
•
Ohms Measurement Methods — Discusses auto and manual ohms measurement
methods and how to select them.
•
Ohms Sensing — Covers 2-wire and 4-wire ohms sensing.
•
Offset-compensated ohms — Describes offset-compensated ohms, which can be used
to overcome the effects of offsets when making low-resistance measurements.
•
Ohms Source Readback — Covers enabling and disabling ohms source readback.
•
6-wire Ohms Measurements — Describes the basic procedure for setting up the
SourceMeter for 6-wire ohms measurement, which can be used for measuring resistor
networks and hybrid circuits.
•
Remote Ohms Programming — Summarizes the basic remote commands required to
program the SourceMeter for ohms measurements and gives several typical program-
ming examples.
4
Advertisement
Chapters
Table of Contents
