Logging In To The Router Through The Aux Port; Configuring Basic Settings - HP FlexNetwork HSR6802 Installation Manual

Logging in to the router through the AUX port

1. After powering on the router, connect the console cable to the console port.
To configure the AUX port:
Step
1. Enter system view.
2. Enter AUX user interface view.
3. Set the authentication mode.
4. Set the user privilege level.
2. Plug the D-9 female connector to the serial port of the configuration terminal or PC.
3. Connect the RJ-45 connector to the AUX port of the router. Then you can log in to the router
through the AUX port.
For more information about how to log in to the router through an AUX port, see HPE FlexNetwork
HSR6800 Routers Fundamentals Configuration Guide.

Configuring basic settings

Step
1. Set the current time and date.
2. Enter system view.
3. Enter Ethernet interface view.
4. Specify an IP address for the
interface.
5. Return to system view.
6. Specify a static route.
7. Save the current
configuration to the startup
configuration file in the root
directory of the storage
media.
8. Verify the running
configuration.
Command
system-view
user-interface aux 0
authentication-mode none
user privilege level 3
Command
clock datetime time date
system-view
interface interface-type
interface-number
ip address ip-address { mask-length |
mask } [ sub ]
quit
ip route-static dest-address { mask |
mask-length } { next-hop-address |
interface-type interface-number
[ next-hop-address ] | vpn-instance
d-vpn-instance-name
next-hop-address } track
track-entry-number [ preference
preference-value ] [ tag tag-value ]
[ description description-text ]
save [ safely ] [ backup | main ]
[ force ]
display current-configuration
40
Remarks
Optional.
Available in user view.
Available in user view.
N/A
By default, no IP address is
assigned to any interface.
Available in any view.
By default, the preference
of a static route is 60, tag is
0, and no description is
configured.
Available in any view.
Available in any view.