Toyota ZZT230 series Repair Manual page 667

01-456
INSPECTION PROCEDURE
Prepare for i n specti o n (See step
1
2
D
�
�
Ai r bag
Front
Sensor (AH)
Ai r bag Sensor
3
D
�
Sensor (RH)
Airbag Sensor
DIAGNOSTICS
on page Di --4 71).
1
CHECK:
(a) Turn the ignition switch to ON.
Ai r bag
Sensor
For the connector (on the airbag sensor assembly side)
(b)
Assembl y
between the front airbag sensor (RH) and the airbag sen­
sor assembly, measure the voltage between body ground
OK: Vol t a ga:
and each of +SR and -SR.
H0344 5
CHECK:
For the connector (on the airbag sensor assembly side) be­
Ai r ba g
Sensor
tween the front airbag sensor (RH) and the airbag sensor as­
Assembly
sembly, measure the resistance between body ground and
OK: Resi s tance:
each of +SA and -sR.
SUPPLEMENTAL RESTRAINT SYSTEM
V
Balow 1
or Hi g her
1 Mn