Toyota ZZT230 series Repair Manual page 398

Measure harness and connector between ECM and automatic transaxle solenoid
2
connector.
N
N
)
"""'
"""'
N """'
)
DIAGNOSTICS
OK: Resi s tance:
Solenoid Connector
AUTOMATIC TRANSAXLE (U240E)
PREPARATION:
Disconnect the solenoid connector from the automatic
(a)
transaxle.
CHECK:
Disconnect the connector from the ECM.
(b)
(a) Measure the harness and connector between terminal
SL 1 + or SL 1- of ECM and terminal SL 1 + or SL 1- of sole­
noid connector.
Measure the harness and connector between terminal
(b)
Sl2+ or St.z - of ECM and terminal SL2+ or SLZ- of sole­
noid connector.
(c) Measure the harness and connector between terminal 84
of ECM and terminal 84 of solenoid connector.
0 n
or connector.
the harness
Dl-187