Toyota ZZT230 series Repair Manual page 451

Di-2'10
Check for short In harness and connector between terminal SPD of ECM connec·
2
tor and body ground.
3
Check voltage between terminal SPD of ECM connector and body ground.
4 Check for open
combination meter (See page
PREPARATI O N:
CHECK:
Disconnect the connector of the ECM.
Check continuity between terminal SPD of the ECM connector
OK: No conti n ui t y (1M
and body ground.
G
PREPARATI O N:
CHECK:
Turn ignition switch ON.
Measure voltage between terminal SPD of ECM connector and
OK: Vol t age: 9 -14 V
body ground.
I n
I N -30).
harness and connector between Instrument panel J/B and
G
or hi g her)
n
Repai r or repl a oo harness or connector.
Check for open I n harness and connector
twee n I n strument panel
1�).
Repai r or repl a ce harness or connector.
be­
and ECM ( S ee page
J/8