Toyota ZZT230 series Repair Manual page 554

" J
5 Check spiral cable.
6 Check harness between a
From
To
the
)
make
Airbag
Sensor
Asse m bly
resul t s of the above I n specti o n, the mal f uncti o ni n g part can
sure of thi s , use the si m ul a ti o n met h od to check.
-
DIAGNOSTICS
SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATI O N:
(a) Disconnect the connector between the airbag sensor as­
sembly and the spiral cable.
(b) Release the airbag activation prevention mechanism of
the spiral cable connector on the airbag sensor assembly
CHECK:
side (See page DI-{J26).
For the connector (on the spiral cable side) between the spiral
cable and the steering wheel pad, measure the resistance be­ D-.
OK: Resi s tance:
tween D+ and
G I Re p ai r or repl a ce spi r al cabl e .
l
g
r ba sensor assembly and
PREPARATI O N:
Release the airbag activation prevention mechanism of the
connector (on the airbag sensor assembly side) between the
airbag sensor assembly and the spiral cable
CHECK:
(See page Dh'l26).
For the connector (on the spiral cable side) between the airbag
sensor assembly and the spiral cable, measure the resistance
OK: Resi s tance:
between D+ and
Re p ai r or repl a ce harness or connect o r be­
tween al r bag sensor assembl y and
H10601
or Hi g her
1 Mn.
spi r al cabl e .
D-.
or Hi g her
1 M.Q
be
now considered normal.
01-343
.
i r a c b
a le
s p l