Toyota ZZT230 series Repair Manual page 459

DH48
Measure harness and connector between ECM and automatic transmission sole­
2
noid connector.
N
3
Check connection of the connectors.
PREPARATION:
Disconnect the solenoid connector from the automatic trans�
axle.
CHECK:
Measure the harness and connector between terminal S 1 or 82
of ECM and terminal 81 or 52 of solenoid connector.
0
OK:
Resistance: Q
I N-3 0) .
Repair or replace the harness or connector (See
page
Connect the connectors correctly.