Toyota ZZT230 series Repair Manual page 636

Check wire harness.
4
)
WAGNOSTICS
PREPARATION:
(a)
(b)
CHECK:
For the connector (on the airbag sensor assembly side) be­
tween the side airbag sensor assembly
Airbag Sensor
sensor assembly, measure the resistance between SSR+ and
Assembly
ESR.
OK:
L> G
SUPPLEMENTAL RESTRAINT SYSTEM
Disconnect the side airbag sensor assembly
nector.
Using a service wire, connect SSR+ and ESR of the con­
nector (on the side airbag sensor assembly side) between
the side airbag sensor assembly (RH) and airbag sensor
assembly.
1 0
Resistance: Balow
tween side atrbag sensor assembly (RH) and
Dl-425
con­
(RH)
(RH) and the airbag