Toyota ZZT230 series Repair Manual page 337

01-126
7 Check whether or not DTC P1349 Is stored.
PREPARATION:
Clear the DTC (See page 01-;3).
(a)
Perform simulation test.
(b)
CHECK:
Check whether or not DTC P1349/P1354 is stored (See page Dl-3).
OK:
DTC P1349 1s not
Replace ECM.
OBD II scan tool (excluding TOYOTA hand-held tester)
Check valve timing (See page
1
stored
B I VVT
•:
DTC P1349 is also output after the foreign object is caught
in some part of the system in the engine oil and the system re­
turns to normal in a short time. As ECM controls so that foreign
objects are ejected, there is no problem about VVT. There is
also no problem since the oil filter should get the foreign object
in the engine oil.
EM-18).
G I Repai r val v e li m i n g.
-
OK. •
system Is