Toyota ZZT230 series Repair Manual page 437

01-226
-
Capacity: 2.9 11ters (3.1
NOTICE:
Do not overfill.
Check the fluid condition.
(b)
If the fluid smells burnt or is black, replace it.
(c) Replace the ATF.
(1)
Remove the drain plug and drain the fluid.
Reinstall the drain plug securely.
(2)
With the engine OFF add new fluid through the oil
(3)
tiller pipe.
Fluid type: ATF Typo T-IV
Capacity: 2.9 11ters (3.1
( 4)
Start the engine and shift the shift lever into all posi­
tions f o m P to L position and then shift into P posi­
r
tion .
(5 ) With the engine idling, check the fluid level. Add
fluid up to the COOL level on the dipstick.
Check the fluid level at the normal operating tem­
(6)
perature, 70 - 80
necessary.
NOTICE:
Do not overfill.
Chock the fluid leaks.
(d)
Check for leaks in the transaxle.
If there are leaks, it is necessary to repair or replace 0-rings,
gaskets, oil seals, plugs or other parts.
us
qts, 2.6 Imp. qts)
qts, 2.6 Imp. qts)
US
· c
(158 - 176 "F), and add as