Toyota ZZT230 series Repair Manual page 345

Dl-134
Check voltage between te r minal BATT of ECM connector and body ground.
1
2 Check EFI fuse.
Room Ji B
Engine
harness
Check and repair
(See - lth1il).
betwHn and Eflluse and
-
PREPARATI O N:
CHECK:
Remove the ECM cover.
body
Measure voltage between terminal BATT of the ECM connector
OK:
and ground.
8 Check
Vohage
PREPARATI O N:
CHECK:
Remove the EFI fuse from the engine room J/B.
OK: Conti n ui t y
Check continuity of EFI fuse.
Check
components
ECM
or connectOr
9-14
V
repl a ce ECM
and (See page IN-30).
connect e d
for short In all the harness and
to
EFI
fuse.