Toyota ZZT230 series Repair Manual page 295

01-84
Check filler neck for damage.
5
f u el
PREPARAnON: cap.
Remove the tank
CHECK:
Visually inspect the filler neck for damage.
6
Check vacuum hoses between vapor pressure sensor and fuel tank, and char­
coal canister and VSV for pressure switching valve and VSV for pressure switch­
CHECK:
(a) Check that the vacuum hose is connected correctly.
Check the vacuum hose for looseness and disconnection.
(b)
( c) Check the vacuum hose for cracks, hole and da
Check hose and tube between fuel tank and charcoal canister.
7
CHECK:
(a) Check for proper connection of the fuel tank and fuel evap pipe (See page EG--6 ) , fuel evap pipe and
fuel tube under the floor, fuel tu b e under the floor and charcoal canister.
Check the hose and
(b)
8
Check charcoal canister for cracks, hole and damage (See page EC-6).
DIAGNOSTICS
G I
G I
t u be
lor cracks, hole and damage.
G I
ENGINE
II I I e r pi pe .
Replace
e .
Repair o r r pl ace
charcoal ca n i s t e r.
R ep lac e