Toyota ZZT230 series Repair Manual page 589

Dl-378
4
Ai r bag
Sensor
Squi b
Assembly
DLC3
HlO&OO
H01021 AB0119
H01070
From the resul t s ofthe above I n specti o n, the mal f uncti o ni n g p art can now
To make sure of thi s , use the si m ul a ti o n method to check. I f the mal f uncti o ni n g part can not be
detect e d by the si m ul a ti o n method, repl a ce al l SRS components I n cl u di n g the wi r e harness.
(RH).
PREPARATI O N:
(a) Turn the igniti o n switch to LOCK
(b) Di s connect negati v e (-) termi n al cable from the battery,
(c) Connect the side airbag assembly (RH) connector.
{d) Connect negative (-} terminal cable to the batlery, and
CHECK:
(a)
(b) Clear the OTC stored in memory
(c) Turn the ignition switch to LOCK, and wait at l e ast for 20
80112/41
DTC
(d) Turn the ignition switch to ON, and wai t at l e ast for 20 se­
(e) Check the DTC (See page Dl-326).
OK: DTC 80112/ 4 1 I s not outp ut.
HINT:
H12022
Codes other than code 80112/41 may be output at this time, but
they are not relevant to this check.
SUPPLEMENTAL RESTRAINT SYSTEM
and wai t at l e ast for 90 seconds.
wait at least tor 2 seconds.
Tur n
the ignition switch to ON, and wai t at least for 20 se­
conds.
(See step on page Dl-326).
5
seconds.
conds.
consi d ered normal .
be