Toyota ZZT230 series Repair Manual page 614

Check alrbag sensor assembly.
3
PIT Squib (RH)
() -H-
P
M
DLC3 DTC 801 3 2/61
�·�
H01020
AB0116A00119
HIOOOO HOI079
)
)
Sensor
Airbag
R-
H10623
-
DIAGNOSTICS SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATI O N:
(a) Connect the connector to the ai r bag sensor assembl y .
(b) Using a servi c e wi r e, connect PR+
nector (on the seat belt pretensi o ner side) between the
seat bel t pretensi o ner (RH) and the airbag sensor assem­
bly.
(c) Connect negative (-) terminal cable to the battery, and
wai t at least for 2 seconds.
CHECK:
(a) Turn the igni t i o n switch to ON and wai t at l e ast for 20 se­
conds.
(b) Clear the DTC stored in memory
(See step on page
5
(c) Turn the i g niti o n swi t ch to LOCK, and wai t at l e ast for 20
seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se­
conds.
(e) Check lhe DTC (See page Dl-326).
OK: DTC
80132/61
HINT:
Codes other than code 80132/61 may be output at thi s time, but
they are not rel e vant to this check.
and
Dl - 326).
I s not output.
Dl-403
PR-of the con-