Toyota ZZT230 series Repair Manual page 301

Dl-00
Check VSV connector for EVAP, VSV connector for CCV, VSV connector for pres­
8
sure switching valve and vapor pressure sensor connector for looseness and
disconnection.
Check vacuum hoses ((8), (9), (10) and (11) In Flg. 1 1n circuit description).
9
CHECK:
(a) Check that the vacuum hose Is connected correctly.
Check the vacuum hose for looseness and disconnection.
( b)
Check the vacuum hose for cracks, hole, damage and blockage.
(c)
1 0 Check voltage between terminals VC and E2 of ECM connector (See page
Dl-8 1).
11 Check voltage between terminals PTNK and E2 of ECM connectors (See page
Dl-81).
ENG INE
-
G
R epair or connect VSV or sensor connector.
G
� p
C h eck and
e
p 13.
G o to st
l
a ce ECM (See page IN-30).