Toyota ZZT230 series Repair Manual page 622

Check PIT squib (LH).
4
OLC3
w e;>
CG Tc
H01018
AB0119
HIOEIOO H0108$
)
From the results of the above Inspection, the malfunctioning part can now be considered normal.
To make sure
)
DIAGNOSTICS
Airbag
Ass Sensor
l y
e
b
m
DTC 80135173
�
H10628
of
this, use the simulation method to check.
-
SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
(a) Turn the ignition swi t ch to LOCK.
(b) Di s connect negative
and wai t at l e ast for 90 seconds.
(c) Connect the seat bel t pretensi o ner
(d) Connect negati v e (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a ) Turn the ignition swi t ch to LOOK, and wai t at l e ast for 20
second.
the ignition switch to ON, and wait at least for 20 se­
(b)
Turn
conds.
(c) Clear the DTC stored in memory (See page Dl-326).
(d) Turn the ignition swi t ch to LOCK,
seconds.
(e) Turn the i g nition switch to ON, and wai t at l e ast for 20 se­
conds.
Check the DTC (See page Dl-326).
(f)
80135/73
OK:
ts
DTC
HINT:
Codes other than code 80135173
they are not relevant to thi s check.
Replace seat belt pretensloner (LH).
from the battery,
(-) terminal cable
connector.
(LH)
wait at least for 20
and
not output.
output at thi s time, but
may be
Dl-411