Dl-424
INSPECTION PROCEDURE
1
DLC3
�
�_lliliUliL
CG
T c
2
Is connector of side alrbag sensor assembly (RH) properly connected?
0
3
Prepare for Inspection (See step 1 on Dl-471 ).
0
CHECK:
(a)
(b )
(c)
(d )
DTC 81140/32
(e)
HINT:
Codes other than code 81140/32 may be output at this time, but
L>
they are not relevant to this check.
SUPPLEMENTAL RESTRAINT SYSTEM
Turn the ignition switch to ON, and wait at least for 20 se
conds.
Clear the DTC stored in memory (See page Dl-326).
Tum the ignition switch to LOCK, and wait at least for 20
seconds.
Turn the ignition switch to ON, and wait at least for 20 se-
conds.
Check the DTC (See page Dl-326).
The malfunctioning part can now
normal. To make sure of this, use the simulation
method to check.
be
considered