Toyota ZZT230 series Repair Manual page 630

Check alrbag sensor assembly.
Squi b (LH)
Pff
c[]
DLC3
CG Tc
H01 017
H0213!1 A11011S
H11Xi00 H01065
)
)
DIAGNOSTICS
PREPARATION:
(a) Connect the connector to the ai r bag sensor assembl y .
bag
(b) Using a servi c e wire, connect PL+ and PL-of the connec­
Sensor Air
Assembl
(c) Connect negative (-) termi n al cable to the battery, and
CHECK:
(a) Turn the ignition swi t ch to ON and wai t at l e ast for 20 se­
(b)
(c)
DTC 80138/72
(d)
(e)
OK:
HINT:
H10633
Codes other than code 80138/72 may be output at lhls time, but
they are not relevant to this check
-
SUPPLEMENTAL RESTRAINT SYSTEM
tor (on the seat belt pretensi o ner side) between the seat
bel t pretensi o ner (LH ) and the ai r bag sensor assembly.
wait at least for 2 seconds.
conds.
Clear the DTC stored in memory
(See step
on page Dl-326).
5
Turn the ignition switch to LOCK, and wait at least lor 20
seconds.
Turn the ignition switch to ON, and wait at least for 20 se­
conds.
Check the DTC (See page Dl-326).
90138172
DTC Is not output.
Re p lace
airbag sensor assembly.
01-419