INSPECTION PROCEDURE
1
Check operation of ABS pump motor.
Replace ABS actuator.
)
)
-
ANTI-LOCK BRAKE SYSTEM WITH ELECTRONIC
DIAGNOSnCS
BRAKE FORCE DISTRIBUTION (EBD)
PREPARATION:
Disconnect the ASS actuator connector.
$
CHECK:
Connect positive
e
lead to terminal GND (A5 - 1 ) of the ASS actuator connector,
check that the pump motor is operates.
OK:
The running sound of the pump motor should be
L)
heard.
Check tor open circuit In harness and connecM
tor between ABS motor relay, ABS actuator and
ABS ECU (See page IN--'1 0 ).
lead to terminal BM (A5 - 2) and negative
01-311