Toyota ZZT230 series Repair Manual page 581

0�70
INSPECTION PROCEDURE
Prepare for Inspection (See step 1 on page Dl-471 ).
1
2 Check side squib (RH) circuit.
Ai r bag
Sensor
Squi b (RH)
Assembl y
c[] FJ=O
-
DIAGNOSTICS
SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
Release the airbag activati o n prevention mechanism of the
connector (on the airbag sensor assembly side) between the
airbag sensor assembly and the side airbag assembl y (RH)
(See page
m-326).
CHECK:
For the connector (on the side airbag assembly side) between
the side airbag assembly (RH) and the airbag sensor assembly,
measure the resi s tance between FR+ and FR-.
1
OK:
Resistance:
L> G
tween side alrbag assembly (RH) and alrbag
Mn or Higher