Toyota ZZT230 series Repair Manual page 624

3
(LH)
Squib
{}
DLC3
)
DIAGNOSTICS
PREPARATION:
{a)
(b) Using a service wire, connect PL+ and PL-of the connec­
Airbag
Sensor
Assembly
{c ) Connect negati v e (-) terminal cabl e to the battery, and
CHECK:
(a ) Turn the ignition swi t ch to ON and wai t at least for 20 se-
(b)
(C)
(d) Turn the ignition swi t ch to ON, and wai t at l e ast for 20 se­
DTC 80136/74
(e)
OK:
HINT:
Codes other than code 80136/74 may be output at this time, but
they are not relevant to thi s check.
-
SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the ai r bag sensor assembl y .
tor (on the seat bel t pretensi o ner si d e) between the seat
bah
pretensioner (LH) and the ai r bag sensor assembl y .
l e ast tor 2 seconds.
w t
al at
conds.
Clear the DTC stored in memory (See page Dl-326).
Turn the ignition switch to LOCK, and wait at least for 20
seconds.
conds.
Check the DTC (See page Dl-326).
DTC B0136174 1s not output.
Replace alrbag sensor assembly.
01-n3