Toyota ZZT230 series Repair Manual page 540

)
)
-
SUPPLEMENTAL RESTRAINT SYSTEM
7.
RELEASE METHOD OF AIRBAG ACTIVATION PRE-
VENTION MECHANISM
An airbag activation prevention mechanism is built into the con­
nector for the squib circuit of the SRS.
When release of the airbag activation prevention mechanism is
directed in the troubleshooting procedure, as shown in the il­
whi c h
lustration of the connectors on the next pa ges, insert paper
has the same thickness as the male terminal between the
terminal and the short spring.
the al r bag acti v ati o n preventi o n mechani s m
release
CAUllON:
on the squi b connector.
Never
•
Oonotrel e asetheai r bagactl v atl o n preventi o n mech­
NOTICE:
ani s m unl e ss speci f i c al l y di r ected by the troubl e ­
•
shoot i ng procedure.
I n sert ed paper l s toothl c kthetermi n al and short
spri n g may damaged, so al w ays use paper wi t h
lithe
the thi c kness as the mal e termi n al .
be
same
0�29