Toyota ZZT230 series Repair Manual page 637

Dl-426
5
Check wire harness.
��
Sensor
D
Airbag
8fj:�6R
DtAGNOSnCS
PREPARATION:
Using a service wire, connect VUPR and FSR of the connector
Airbag
(on the side airbag sensor assembly side) between the side air­
bag sensor assembly (RH) and airbag sensor assembly.
Sensor
CHECK:
For the connector (on the airbag sensor assembly side) be­
tween the side airbag sensor assembly (RH) and the airbag
sensor assembly, measure the resistance between VUPR and
FSR.
Sensor
OK:
Resistance: Below
FSR
L>
-
SUPPlEMENTAL RESTRAINT SYSTEM
1 n
Repair or replace harness or connector
tween side alrbag sensor assembly (RH) and
alrbag sensor assembly.
be-­