Toyota ZZT230 series Repair Manual page 633

Dl-422
DTC 81100131 output again?
3
DTC 81100/31
DLC3
CG
Tc
"""
HIOIOO FU39<1
Replace alrbag sensor assembly.
SUPPlEMENTAL RESTRAINT SYSTEM
PREPARATION:
Clear the DTC (See step 5 on page D/-326).
CHECK:
Turn the ignition switch to LOCK, and wait at least for 20
(a)
seconds.
(b) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
Repeat operation in step (a) and (b) at least 5 times.
(c)
Check the DTC (See page D/-326).
(d)
HINT:
Codes other than code 811 00/31 may be output at this time, but
they are not relevant to this check.
Using simulation method, reproduce malfunc­
H10635
lion symptoms (See page /N-20).