Toyota ZZT230 series Repair Manual page 552

)
Check alrbag sensor assembly.
3
Cabl e
Spiral
DSquib
O
N
0
DLC3
)
DIAGNOSTICS
PREPARATI O N:
(a)
(b)
CHECK:
Airbag
Sensor
Assembly
(a)
-H--
(b)
(c)
(d)
OK:
(e)
DTC
80100/13
HINT:
Codes other than code 801 00/13 may be output at this time, but
they are not relevant to this check.
SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
Turn the ignition switch to ON and wait at least for 20 se-
conds.
Clear the DTC stored in memory (See page Dl-326 ).
Turn the ignition switch to LOCK, and wait at least for 20
seconds.
Turn the ignition switch to ON, and wait at least for 20 se+
conds.
Check the DTC (See page Dl-326 ).
DTC i s not out p ut .
80100113
01�41