Toyota ZZT230 series Repair Manual page 638

6 I
Check wire harness (to ground).
Si d e Ai r bag Sensor
Assembl y
(RH)
D
Ai r
)
7
Check wire harness (to B+).
ON
Si d e Ai r bag Sensor
Assembl y
D
)
Airbag
9
Sensor
�
g Sensor Assef11 b l y
Airbag
(RH)
Sensor
[)=fil
HOB�70
DIAGNOSTICS
SUPPLEMENTAL RESTRAINT SYSTEM
CHECK:
For the connector (on the airbag sensor assembly side) be­
tween the side airbag sensor assembly (RH) and the airbag
sensor assembly, measure the resistance between body
ground and each of SSR+, VUPR and FSR.
OK:
Resistance: Below 1 n
L>
Repair or replace harness or connector be­
tween side alrbag sensor assembly {RH) and
alrbag sensor assembly.
CHECK:
Turn ignition switch to
(a)
(b) For the connector (on the airbag sensor assembly side)
between the side airbag sensor assembly (RH) and the
airbag sensor assembly, measure the voltage between
the body ground and each of SSR+, VUPR, ESR and
FSR.
OK:
0
Voltage: V
Repair or replace harness or connector be­
tween side alrbag sensor assembly (RH} and
alrbag sensor assembly.
ON.
Dl-427