[A-1]
[A-2]
[B-1]
[B-2]
[A-1]: Left-hand steering hard top model
[A-2]: Right-hand steering hard top model
[B-1]: Left-hand steering canvas top model
[B-2]: Right-hand steering canvas top model
MAIN RELAY
Inspection
1) Disconnect negative cable at battery.
2) Remove main relay (1) from connector.
1. Main relay
2. Junction (Fuse) box
3) Check resistance between each two terminals as in table below.
ENGINE AND EMISSION CONTROL SYSTEM (G16 / J20 ENGINE) 6E1-43
TERMINALS
Between A and B
CANVAS TOP
Between C and D
Between C and D
HARD TOP
If check results are as specified, proceed to next operation
check. If not, replace.
RESISTANCE
8 (Infinity)
79 – 95
at 20_C, 68_F
at 20_C 68_F
70 – 110