If measured camshaft journal clearance exceeds limit, measure
journal (housing) bore and outside diameter of camshaft journal.
Replace camshaft or cylinder head assembly whichever the differ-
ence from specification is greater.
Item
Camshaft journal
bore dia. (IN & EX)
Camshaft journal
O.D. (IN & EX)
Wear of Hydraulic Valve Lash Adjuster
Check adjuster for pitting, scratches, or damage.
If any malcondition is found, replace.
Measure cylinder head bore and adjuster outside diameter to deter-
mine cylinder head-to-adjuster clearance. If clearance exceeds
limit, replace adjuster or cylinder head.
Item
Hydraulic valve
lash adjuster
O.D.
Cylinder head
bore
Cylinder head
to adjuster
clearance
ENGINE MECHANICAL (J20 ENGINE) 6A4-41
Standard
26.000 – 26.033 mm
(1.0236 – 1.0249 in.)
25.934 – 25.955 mm
(1.0210 – 1.0218 in.)
Standard
30.959 – 30.975 mm
(1.2189 – 1.2194 in.)
31.000 – 31.025 mm
(1.2205 – 1.2214 in.)
0.025 – 0.066 mm
(0.0010 – 0.0025 in.)
Limit
–
–
0.15 mm
(0.0059 in.)