Suzuki 2000 Grand Vitara SQ625 Service Manual page 524

WATER PUMP
REMOVAL
For G16 engine
1) Disconnect negative (–) cable at battery.
2) Drain cooling system.
3) Remove timing belt and tensioner referring to "TIMING BELT
AND BELT TENSIONER" in Section 6A1.
4) Remove rubber seal (1) between oil pump and water pump.
5) Remove oil level gauge guide (1) with oil level gauge.
6) Remove generator adjusting arm (1).
7) Remove water pump assembly (1).
CAUTION:
Do not disassemble water pump.
If any repair is required on pump, replace it as assembly.
ENGINE COOLING 6B-19