6A1-26 ENGINE MECHANICAL (G16 ENGINE)
5) Install CKP sensor (1) and connect its coupler.
Tightening Torque
.
(a): 10 N
m (1.0 kg-m, 7.5 lb-ft)
6) Install front differential housing with differential according to
installation procedure described in "DIFFERENTIAL" section.
7) Refill front differential housing with gear oil, referring to "DIF-
FERENTIAL" section.
8) Refill engine with engine oil, referring to item "ENGINE OIL
CHANGE" in section 0B.
9) Verify that there is no engine oil leakage and differential oil
leakage at each connection.