Throttle Body And Intake Manifold - Suzuki 2000 Grand Vitara SQ625 Service Manual

6A2-8 ENGINE MECHANICAL (H25 ENGINE)

THROTTLE BODY AND INTAKE MANIFOLD

REMOVAL
1) Release fuel pressure in fuel feed line by referring to Section 6.
2) Disconnect negative cable at battery.
3) Drain coolant.
1. Radiator
2. Radiator drain plug
4) Remove strut tower bar.
5) Disconnect coupler from intake air temp. sensor.
9
CAUTION:
This work must not be done when engine is hot. If done
so, it may cause adverse effect to catalyst.
WARNING:
To help avoid danger of being burned, do not remove
drain plug and radiator cap while engine and radiator are
still hot. Scalding fluid and steam can be blown out under
pressure if plug and cap are taken off too soon.
1. Air cleaner box
2. Intake air hose
3. Intake air pipe
4. Surge tank pipe
5. Intake manifold
6. Throttle body
7. Intake collector
8. Intake air temperature sensor
9. Manifold absolute pressure
(MAP) sensor