Suzuki 2000 Grand Vitara SQ625 Service Manual page 336

6A2-12 ENGINE MECHANICAL (H25 ENGINE)
1. EVAP canister purge valve
2. EGR valve
3. EGR pipe
4. EVAP canister purge valve hose
1. TP sensor coupler
2. MAF sensor coupler
3. IAC valve coupler
1. Injector wire
2. Brake booster hose
1. Accelerator cable
2. A / T throttle cable
3. Water hose
1
10) Connect couplers of manifold absolute pressure (MAP) sen-
5. Heater hose
6. PCV hose
7. Water hose
8. Breather hose
11) Install clamp bracket to intake collector.
12) Connect earth terminal to intake collector.
13) Connect couplers of TP sensor, MAF sensor and IAC valve.
4. Earth wires
5. Clamp bracket
14) Connect brake booster hose to intake manifold.
15) Connect injector wire coupler.
16) Connect water hoses to throttle body.
17) Connect accelerator cable and A/T throttle cable (for A/T ve-
18) Install surge tank pipe to intake manifold with new gaskets and
2
1. Intake air pipe
2. Surge tank pipe
7) Install EGR pipe with new gaskets.
8) Connect hoses of EVAP canister purge valve and heater.
9) Connect hoses of PCV, breather and water.
sor, EVAP canister purge valve and EGR valve.
Fix wire harness with clamps.
hicle) to throttle body.
intake air pipe to throttle body.