Suzuki 2000 Grand Vitara SQ625 Service Manual page 710

3
2
2
1. Rear housing
2. Stator core
3. Front housing
4. Lever
1. Pulley nut
2. Rotor
3. Cloth
4. Vise
1. Front housing
2. Retainer screw
3) With lever inserted between stator core and front housing, sepa-
rate generator into front and rear sides.
4
3
4) Loosen pulley nut by using vise and take off pulley.
NOTE:
_ When using vise, put clean cloth between rotor and vise
so as not to cause damage to rotor.
_ Be sure to hold the location A. Do not hold the location B
as it does not have enough structural strength.
5) Remove rotor from front housing.
6) When removing front bearing, remove bearing retainer screws
and retainer.
CHARGING SYSTEM 6H-17