Suzuki 2000 Grand Vitara SQ625 Service Manual page 536

Rear
side
1. Fuel tank 8. Fuel vapor line (to
2. Fuel pump (with fuel
level gauge) 9. Fuel tank protector
3. Fuel filter 10. Belt
4. Fuel filler cap 11. Filler neck
5. Breather hose 12. Breather pipe
6. Fuel feed line 13. Filler hose
(to delivery pipe) 14. Tank inlet valve
7. Fuel return line (from 15. Fuel cut valve
delivery pipe) 16. Fuel tank pressure sensor
1. Fuel filter
2. Fuel filter outlet hose
3. Fuel filter inlet hose
INSTALLATION
1) Install fuel pump assembly and fuel cut valve to fuel tank. Refer
2) Connect fuel hoses to fuel tank, fuel cut valve and fuel pump as-
3) Install inlet valve to fuel tank.
4) Install fuel tank by using fuel tank belts and then install protector
Rear
side
5) Connect fuel filler hose to fuel tank and breather hose to fuel filler
6) Install fuel filler hose protector.
EVAP canister)
7) Connect fuel vapor hose (1) and return hose (2) to fuel pipe and
8) Connect fuel filter inlet hose to fuel filter.
to "FUEL PUMP" in this section.
sembly.
After connecting, clamp hoses securely.
If deformed or damaged in any other way, replace with a new
one.
to vehicle.
Tightening Torque
Fuel tank bolt (a): 50 N
Fuel tank protector bolt (a): (50 N
neck. Clamp them securely.
Tightening Torque
Breather hose clamp (b): 2.0 N
Fuel filler hose clamp (c): 4.0 N
clamp them securely.
ENGINE FUEL 6C-7
.
m (5.0 kg-m, 36.5 lb-ft)
.
m (5.0 kg-m, 36.5 lb-ft)
.
m (0.2 kg-m, 2.0 lb-ft)
.
m (0.4 kg-m, 3.0 lb-ft)