1. Rectifier
2. Condenser
Rectifier
1) Using ohmmeter, check continuity between each of upper and
lower rectifier bodies and each diode lead.
Check both directions by reversing probes of ohmmeter and
there should be only one-way continuity in each case.
If check result is not satisfactory, replace rectifier.
2) In the same manner as described in above step 1), check that
there is only one-way continuity between both leads of diode trio.
1. Rectifier
2. Diode lead
Condenser
Check condenser capacity.
Condenser capacity: 0.5 mF
CHARGING SYSTEM 6H-23