6A4-38 ENGINE MECHANICAL (J20 ENGINE)
CAMSHAFTS AND VALVE LASH ADJUSTERS
REMOVAL
1) Disconnect negative cable at battery.
2) Drain engine oil.
3) Drain coolant.
4) Remove oil pan and oil pump strainer.
Refer to item "OIL PAN AND OIL PUMP STRAINER" in this sec-
tion for removal.
5) Remove cylinder head cover.
Refer to item "CYLINDER HEAD COVER" in this section for re-
moval.
6) Remove timing chain cover.
Refer to item "TIMING CHAIN COVER" in this section for remov-
al.
7) Remove 2nd timing chain.
Refer to item "2ND TIMING CHAIN AND CHAIN TENSIONER"
in this section for removal.
8) Remove CMP sensor.
Refer to Section 6F2 for CMP sensor removal.
1. Intake camshaft
2. Exhaust camshaft
3. Camshaft housing
4. Intake camshaft housing
5. Exhaust camshaft housing
6. Valve lash adjuster
7. CMP sensor
8. Oil relief valve
9. Timing chain guide No.2