6A2-26 ENGINE MECHANICAL (H25 ENGINE)
(a)
1. Oil pump chain guide
3) Assemble oil pump. After assembling oil pump check to be sure
INSTALLATION
1) Install oil pump to crankcase.
(d): Long size
2) Hand-tighten oil pump chain guide bolts.
1
3) To take up slack of oil pump chain, push center of oil pump chain
(e)
4) Install timing chain cover, oil pump strainer and oil pan.
that rotor turns smoothly by hand.
Tightening Torque
.
(a): 12.0 N
m (1.2 kg-m, 8.5 lb-ft)
Tightening Torque
.
(c), (d): 27.0 N
m (2.7 kg-m, 19.5 lb-ft)
guide with a force of 0.5 to 0.6 N (50 – 60 g, 0.11 – 0.13 lb) then
tighten oil pump chain guide bolts to specified torque.
Tightening Torque
.
(e): 11 N
m (1.1 kg-m, 7.5 lb-ft)
Refer to item "TIMING CHAIN COVER" in this section.