J20 Engine
H25 Engine
J20 Engine
H25 Engine
1. Ignition coil bolt
2. Ignition coil assembly
1. Ignition coil bolt
2. Ignition coil
3. Spark plug
ON-VEHICLE SERVICE
IGNITION COIL ASSEMBLY (IGNITER AND
IGNITION COIL)
REMOVAL
1) For H25 engine, remove ignition coil cover.
2) Disconnect ignition coil coupler.
3) Remove ignition coil bolt, and then pull out ignition coil assem-
bly.
INSPECTION
Check ignition coil assembly for the following:
_ Damage
_ Deterioration
_ Terminal for corrosion
INSTALLATION
Install in reverse order of removal.
SPARK PLUG
REMOVAL
1) For H25 engine, remove ignition coil cover.
2) Disconnect ignition coil coupler.
3) Remove ignition coil bolt, and then pull out ignition coil assem-
bly.
4) Remove spark plug.
IGNITION SYSTEM (FOR J20 / H25 ENGINES) 6F2-9