1. Parallel
INSTALLATION
1) Apply engine oil to rocker arm shaft and rocker arms.
2) Install rocker arm shaft, rocker arm (exhaust side) and rocker
1. Rocker arm spring
2. Rocker arm (EX)
3) Check O-ring for damage or deterioration. With O-ring groove in
1. Rocker arm shaft
2. O-ring
4) Set rocker arm shaft so that its cut part faces down and becomes
If measured camshaft journal clearance exceeds limit, measure
journal (housing) bore and outside diameter of camshaft journal.
Replace camshaft or cylinder head assembly whichever the dif-
ference from specification is greater.
Item
Camshaft Journal bore dia.
Camshaft journal O.D.
arm spring.
rocker arm shaft exposed to transmission side once, install O-
ring to rocker arm shaft.
in parallel with head cover mating surface.
ENGINE MECHANICAL (G16 ENGINE) 6A1-37
Standard
28.000 – 28.021 mm
(1.1024 – 1.1031 in.)
27.939 – 27.960 mm
(1.1000 – 1.1008 in.)