Ignition Coil Assembly (Igniter And Ignition Coil) - Suzuki 2000 Grand Vitara SQ625 Service Manual

1. Ignition coil bolt
2. Ignition coil assembly
1. Ignition coil assembly
IGNITION COIL ASSEMBLY (IGNITER AND
IGNITION COIL)
REMOVAL
1) Disconnect ignition coil coupler.
2) Disconnect high-tension cord from ignition coil assembly.
3) Remove ignition coil bolt, and then pull out ignition coil assem-
3. High-tension cord
INSPECTION
Check for damage, deterioration and terminal corrosion.
If check result is not satisfactory, replace ignition coil assembly.
INSTALLATION
1) Install ignition coil assembly.
2) Tighten ignition coil bolt, and then connect ignition coil coupler.
3) Install high-tension cord to ignition coil assembly while gripping
1. Ignition coil bolt
2. Ignition coil assembly
3. High-tension cord
bly.
its cap.
IGNITION SYSTEM (FOR G16 ENGINE) 6F1-9