Suzuki 2000 Grand Vitara SQ625 Service Manual page 670

6G-8 CRANKING SYSTEM
7) Remove snap ring, then pull out pinion stop ring and over-run-
1. Internal gear
2. Snap ring
3. Pinion stop ring
4. Over-running clutch
8) Remove rear bracket and brush holder.
1. Rear bracket
2. Armature
3. Yoke
9) Remove armature from yoke and then ball from the end of ar-
1. Armature
2. Yoke
3. Ball
10) Remove brush holder from rear bracket.
1. Rear bracket
2. Brush holder
ning clutch and internal gear.
Special Tool
(A): 09900-06107
mature shaft.