Suzuki 2000 Grand Vitara SQ625 Service Manual page 356

6A2-32 ENGINE MECHANICAL (H25 ENGINE)
11) Turn crankshaft two rotations clockwise then align timing mark
on crankshaft and timing mark on cylinder block as shown in
figure.
Check each other timing marks that align them shown in figure.
1. Crank timing pulley key
2. Oil jet
3. Timing mark of RH bank 1st timing chain sprocket
4. Timing mark of RH bank 1st timing chain
5. Timing mark or LH bank 2nd timing chain intake sprocket
6. Timing mark of LH bank 2nd timing chain
7. Timing mark of LH bank 2nd timing chain exhaust sprocket
8. Timing mark of LH bank 2nd timing chain
9. Timing mark of RH bank 2nd timing chain intake sprocket
10. Timing mark of RH bank 2nd timing chain exhaust sprocket
12) Apply oil to timing chains, tensioner adjusters sprockets, and
guides.
13) Install timing chain cover, oil pan, front differential housing, P/S
system, cooling system, intake manifold with throttle body and
other parts.
14) Refill cooling system, P/S system, front differential and engine
with each oil/fluid.
15) Check wheel alignment, referring to Section 3.
16) Verify that there is no fuel leakage, water leakage and oil leak-
age at each connection.