Suzuki 2000 Grand Vitara SQ625 Service Manual page 344

6A2-20 ENGINE MECHANICAL (H25 ENGINE)
1. O-ring
CLEAN
D Inside of oil pan and oil pump strainer screen.
1. Oil strainer
2. Screen
D Clean sealing surface on upper oil pan, lower oil pan and lower
crankcase.
Remove oil, old sealant, and dust from sealing surface.
INSTALLATION
1) Install new O-ring to lower crankcase as shown in figure.
2) Install two new O-rings to oil pump strainer.
3) Apply sealant "A" to upper oil pan sealing surface area as shown
1. Upper oil pan
in figure.
"A": Sealant 99000-31150
4) Place the upper oil pan on the cross member and suspension
1. Upper oil pan
member (just beneath the lower crankcase).
At this point install oil pump strainer.
Tightening Torque
(a): 11 N
.
m (1.1 kg-m, 8.0 lb-ft)